Audio-Technica’s System 10 PRO rack-mount digital wireless system provides the same interference-free operation in the 2.4GHz range as the original System 10 but with expanded features and versatility. The durable rack-mount chassis houses two receiver units that can be operated locally or released from the chassis and mounted remotely – even in separate rooms – via Ethernet cable. Up to five chassis (10 receivers) can be linked using the RJ12 cable included with each system, allowing for the simultaneous use of up to 10 channels. Both the receiver chassis and transmitters feture easy-to-read displays.
System 10 PRO lets you fit up to four channels in a single (19″) rack space. Each System 10 PRO dual-channel chassis takes up half a rack space and can be mounted alone using the included mounting brackets and screws. But two chassis can also be fastened together with the joining plate that comes with each system and mounted together into a single rack space, providing very efficient multichannel installation.
Like all System 10 products, System 10 PRO provides three levels of diversity assurance: frequency, time, and space. Frequency Diversitysends the signal on two dynamically allocated frequencies for interference-free communication. The system is continuously monitoring the spectrum and can change one or both of the frequencies on the fly if interference is encountered. Time Diversity sends the signal in two time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to compensate for the inherently shorter wavelengths of a 2.4 GHz system, thereby maximizing signal integrity.
• Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
• 2.4 GHz range – completely free from TV interference
• Each receiver chassis houses two receiver units that can also be mounted remotely via Ethernet cable
• Up to five chassis (ten receivers) can be linked and used simultaneously
• Chassis’ LCD System Display shows RF signal level, System ID, transmitter battery level, and system link status
OVERALL SYSTEM SPECIFICATIONS
| OPERATING FREQUENCIES | 2.4 GHz ISM band |
| DYNAMIC RANGE | >109 dB (A-weighted), typical |
| TOTAL HARMONIC DISTORTION | <0.05% typical |
| OPERATING RANGE | 60 m (100′) typical Open range environment with no interfering signals |
| OPERATING TEMPERATURE RANGE | 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures |
| FREQUENCY RESPONSE | 20 Hz to 20 kHz Depending on microphone type |
| AUDIO SAMPLING | 24 bit / 48 kHz |
| LATENCY | 3.8ms |
ATW-RC13 RECEIVER CHASSIS SPECIFICATIONS
| MAXIMUM OUTPUT LEVEL | XLR, balanced: 0 dBV 1/4″ (6.3 mm), unbalanced: +6 dBV |
| POWER SUPPLY | 100-240V AC (50/60 Hz) to 12V DC .5A switched mode external power supply |
| DIMENSIONS | 209.8 mm (8.26″) W x 44 mm (1.73″) H x 169.3 mm (6.67″) D |
| NET WEIGHT | 940 grams |
| REMOTE RECEIVER CONNECTOR | RJ45 |
| LINK CONNECTOR | RJ12 |
| ACCESSORY INCLUDED | AC adapter, link cable, rack-mount adapters, joining plate, rubber feet |
UNIPAK® BODY-PACK TRANSMITTER SPECIFICATIONS
| RF POWER OUTPUT | 10 mW |
| SPURIOUS EMISSIONS | Following federal and national regulations |
| INPUT CONNECTIONS | Four-pin Locking Connector, Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V |
| BATTERIES | Two 1.5V AA (not included) |
| BATTERY LIFE | >7 hours (alkaline) Depending on battery type and use pattern |
| DIMENSIONS | 70.2 mm (2.76″) W x 107.0 mm (4.21″) H x 24.9 mm (0.98″) D |
| NET WEIGHT | 100 grams (3.5 oz) without batteries |
HANDHELD TRANSMITTER SPECIFICATIONS
| RF POWER OUTPUT | 10 mW |
| SPURIOUS EMISSIONS | Following federal and national regulations |
| BATTERIES | Two 1.5V AA not included |
| BATTERY LIFE | >7 hours (alkaline) Depending on battery type and use pattern |
| DIMENSIONS | 254.8 mm (10.03″) long, 50.0 mm (1.97″) diameter |
| NET WEIGHT | 280 grams (9.9 oz) without batteries |
| ACCESSORY INCLUDED | AT8456a Quiet-Flex™ stand clamp |
ATW-RU13 RECEIVER UNIT
| RECEIVING SYSTEM | Diversity (frequency/time/space) |
| DIMENSIONS | 57mm (2.24″) W x 19mm (0.75″) H x 77.6mm (3.06″) D |
| WEIGHT | 64 grams |
| REMOTE RECEIVER CONNECTOR | RJ45 |
| MOUNTING THREAD INSERT | 1/4″ x 20 |
| ACCESSORY INCLUDED | Antennas, AT8690 RU13 holder |
Includes: ATW-RC13 receiver chassis, ATW-RU13 x2 receiver unit, ATW-T1001 x2 UniPak® transmitter.
Includes: ATW-RC13 receiver chassis, ATW-RU13 x2 receiver unit, ATW-T1001 x2 UniPak® transmitter, AT-829cW x2 cardioid condenser omnidirectional lavalier microphone.
Includes: ATW-RC13 receiver chassis, ATW-RU13 x2 receiver unit, ATW-T1001 x2 UniPak® transmitter, AT-831cW x2 omnidirectional lavalier microphone.
Includes: ATW-RC13 receiver chassis, ATW-RU13 x2 receiver unit, ATW-T1001 x2 UniPak® transmitter, AT-829cW omnidirectional lavalier microphone, ATW-T1002 unidirectional microphone/transmitter.
Includes: ATW-RC13 receiver chassis, ATW-RU13 x2 receiver unit, ATW-T1001 x2 UniPak® transmitter, AT-831cW omnidirectional lavalier microphone, ATW-T1002 unidirectional microphone/transmitter.
Includes: ATW-RC13 receiver chassis, ATW-RU13 x2 receiver unit, ATW-T1002 x2 unidirectional microphone/transmitter.